Condition Monitoring Hardware

 

We have a range of Condition Monitoring Hardware to suit various  applications, ranging from standard condition monitoring in a tame environment to full 3 point spectral vibration monitoring in a ATEX environment.

Our condition monitoring sensors provide onsite engineers with data to monitor the health of assets  and the solution monitors asset vibration, temperature, power and acoustics from an intuitive customised dashboard to predict and prevent breakdowns.

The consolidated data allows the business to make informed decisions regarding maintenance regimes, life-cycle replacement and capital investment.

You will be able to intelligently deploy engineers and focus on under-performing assets to prevent failure and respond immediately in critical environments before they impact the business.

Tri -axis accelerometer

Part Number   EPH-V11

Sensor             MEMS tri-axis accelerometer

Frequency Range (@ 25600 SR)    10kHz (x,y); 5.1 kHz (z)

Dynamic Range    8  /  16  /  32 G

Internal Temp Accuracy _+ 5 0C

Status (Every 5 min)   Internal RMS, Battery, Temperature, Alarm

High Sensitivity/High Range Sensors

Atex series for gas and dust environments

  • EPH-ATX15 High Sensitivity Triaxial
  • Freq Range: 0.5 Hz – 4 kHz
  • Dynamic Range: 2/4/8G Configurable
  • Lines of Resolution: 6400
  • Recording Time: 1 – 16 Seconds Configurable
  • Battery Life: Up to 12,000 Recordings
  • EPH-ATX16 High Range Triaxial
  • Freq Range: 10 Hz – 10 kHz
  • Dynamic Range: 8/16/32G Configurable
  • Lines of Resolution: 6400
  • Recording Time: 1 – 16 Seconds Configurable
  • Battery Life: Up to 12,000 Recordings

Gateway

These sensors can also be integrated with existing instrumentation, via our installed gateways, data such as – pressure, level and flow can be easily visualised on the AIM dashboard.

EPH-G60 2-Channel for Analog Speed Sensors

Receives 3-24V analog signals from:

  • Proximity Probes
  • Velocimeters
  • Accelerometers

Incorporates sensor data into the Phantom

machine health monitoring system.

EPH-G61 4-Channel for 4-20mA Digital Sensors

Receives 4-20mA digital signals from nearly any

type of process sensor. Incorporates sensor data

into the Phantom system.

EPH-G62 4-Channel for Switch/Relay Position

Receives digital signals from Switches or Relays.

Incorporates position into the Phantom system.

EPH-G63 4-Channel for low freq 0-10V Sensors

Receives 0-10V signals from nearly any type

of process sensor. Incorporates sensor data into

the Phantom system