Tag Archives: asset insight manager

  • Home
  • Tag Archives: "asset insight manager"

AIM Installation at BOC Scunthorpe

Asset Handling have installed our AIM condition monitoring solution on to a 5MW Nitrogen compressor at BOC Scunthorpe to allow them to predict failure signs ahead of the issues becoming a catastrophic failure.

Our real time monitoring will monitor the compressors vibration, bearing temps, acoustic and the compressors power levels, while the artificial intelligence engine will learn the normal behaviour and alert key personal if an event is detected.

The consolidated data will allow BOC to make informed decisions regarding maintenance regimes, lifecycle replacement and capital investment.

Our condition monitoring device communicate wireless back to our data concentrator that is connected to a 4g router, therefore
independent of the clients network which allows quick installation, without impact on any other business areas.

Condition Based Maintenance explained…………..

Condition Based Maintenance explained…………..

Condition Based Maintenance (CBM) allows preventative and corrective actions to be scheduled at the optimal time by monitoring the condition or performance of equipment through various technologies and collecting, analysing and identifying real-time data trends to predict equipment failure. Action can then be taken to prevent or delay failure, ensuring that the reliability of the equipment remains high.

CBM uses the actual condition of the asset, via Spectral Vibration Analysis to decide what maintenance must be carried out, while dictating that maintenance should only be performed on an as-needed basis when key indicators show signs of decreasing performance or upcoming failure.

Various process parameters and material samples such as pressure, temperature, vibration, acoustics, flow, materials for example oil and air and any 4-20mA signal are used in CBM as indicators of system and equipment health, performance and integrity, providing information for the timely scheduling of corrective action.

The immediate benefits of such a highly sophisticated prognostic maintenance tool are that it can recognise developing faults within a machine, identifying factors that can cause faults to develop in the first place. The greater benefit is derived from a combined technology approach that can be used to dramatically increase machine operating life, productivity and ultimately business profitability.

It must be noted that CBM should not be used to substitute the more traditional maintenance management methods, such as run to failure, but as a valuable addition to a comprehensive, total maintenance programme.

Contact us to find out more on 0845 075 5886 or [email protected]

Have a Merrier Christmas with Asset Insight Manager

Have a Merrier Christmas with Asset Insight Manager

Christmas is fast approaching and people everywhere are busy buying and wrapping gifts, getting the food shop and dressing the tree.

But for many of us work doesn't stop over the holidays so it's wise to do what you can to limit the impact on your Christmas break. If your role involves taking care of valuable assets such as data cabinets, conveyor or fire systems to name a few, then Asset Handling can help.

The Asset Insight Manager (AIM) system uses AH21 sensors attached to the assets to send a stream of continuous real time data on the condition and performance of the asset to your PC, tablet or smartphone.

Spectral analysis identifies trends reducing and eliminating false alarms, so you are only alerted if there is a genuine fault, with fewer interruptions you can relax and enjoy the festive season.

This is only a small part of what AIM can do, so please give us a call to find out how AIM can help you better manage your assets................and your time.

Merry Christmas x

Award win for Asset Handling at the Smart Factory Expo

Asset Handling seized the opportunity to pitch their condition monitoring solution at the Hack and Pitch Smart Factory Expo in Liverpool and walked away with a well-deserved win in the condition monitoring category.

Digital Catapult’s Hack and Pitch competition provides SME’s and new enterprises the opportunity to pitch innovative solutions to challenges faced by leading names in manufacturing including BOC, Thales and RS Components at the Smart Factory Expo which hosted around 4000 manufacturers across the 15 and 16 November.

Steve Edgson, Director at Asset Handling presented the Asset Insight Manager (AIM) condition monitoring system to answer BOC’s challenge of ‘the use of machine monitoring in the gas production process.’

BOC’s team monitor a diverse range of machinery used in the gas production process. While most BOC plants are monitored through a Remote Operating Centre, many of the machines have limited sensors or gauges. For those that don’t, the inspection process is manual without real-time visibility of variables such as vibrations, temperatures and pressures. BOC would like to more effectively and remotely monitor and track their machines, especially compressors, to be able to respond promptly to alerting signs and ultimately avoid failures.

The AIM system deploys sensors attached to the asset which monitor vibration, temperature and acoustics with spectral analysis applied to vibration monitoring to enable machine learning. Continuous real time data is streamed directly to engineers reporting on asset performance resulting in more proactive rather than reactive maintenance.

Following the category win Steve Edgson stated “This is a proud day for Asset Handling, we know we offer a superb solution with AIM, but to present the system and win in front of leading manufacturers is fantastic.”

Details of the event and all winners can be found on The Manufacturer website  

For more details on Asset Insight Manager please visit our website  and watch the AIM video which gives an overview of the system or you can contact us on 0845 075 5886 to arrange a free no obligation demo.